3d printing events

Featured

AMS 2023: CEOs Show No Mercy for the Past, Discuss Opportunities for 3D Printing Industry

What has additive manufacturing (AM) taught us in the last decade? Will supply chains become more digital? Can the software revolution create intelligent AM machines? These are just a few…

Featured

Defense Logistics Agency to Standardize 3D Printing for US Military

The Defense Logistics Agency (DLA), a combat support agency within the U.S. Department of Defense (DoD), recently announced that the organization is developing a set of common standards and methods…

Xolo’s Volumetric 3D Printing Gets €8M Boost

Xolo, the developer of the first commercial volumetric 3D printer, announced that it has successfully closed its latest Series A funding round, raising a total of €8 million ($8.6 million)….

AMS Spotlight: Mobility goes Additive & 3D Printing for the Rail Industry

Suddenly, interest in regulatory regimes for the rail industry appears poised to increase exponentially. Of course, this is owing to the unusual level of mass media attention that has fallen…

AMS 2023 Lines up New 3D Printing Speakers and Sponsors

Ahead of the 2023 edition of Additive Manufacturing Strategies (AMS), New York’s only 3D printing event is already beginning to add speakers and sponsors. The event, set to take place…

Women in 3D Printing Gets Boost from SME, Toure Weighs in

Women in 3D Printing (Wi3DP) has already done much to change the additive manufacturing (AM) landscape. Through a variety of projects, including its TIPE event, it has not only opened…

Tips for Surviving Your First 3D Printing Trade Show

With the most severe COVID restrictions seemingly paused, at least for the moment, it seems as though trade show season is back n full swing. And, if the crowd at…

Featured

The State of 3D Printing: Reading the Room at RAPID + TCT

As far as cliches go, “timing is everything” is a pretty good one. It’s especially useful to keep in mind for when you’re making predictions: voice your prediction too early…

Sponsored

TCT 3Sixty Brings 3D Printing to the UK this June

TCT 3Sixty, the UK’s definitive and most influential 3D printing and additive manufacturing event returns on June 8-9 to the NEC, Birmingham. TCT 3Sixty goes beyond simply raising awareness and…

3D Printing Webinar and Event Roundup: May 22, 2022

A new week means a fresh docket of 3D-printing webinars and events! In Orono, Maine, on Monday, May 23, and Tuesday, May 24, the America Makes: Manufacturing Renew3d conference will…

3D Printed Housing Conference Takes Realistic Approach to Enormous Task

Perhaps more than any other segment within the broader 3D printing industry these days, additive construction (AC) falls victim to too much hype. There are obvious reasons for this. For…

3D Printing Webinar and Event Roundup: April 10, 2022

This week kicks off with COExperience 2022 by Dassault Systèmes, and Stratasys continues its mobile showroom tour. Plenty of AM industry companies will be at various IME West shows, and…

Featured

Boeing, Others Added to 3D Printing Event AMS 2022

The lineup for the 2022 Additive Manufacturing Strategies (AMS) event is nearly complete, as organizers from SmarTech Analysis and 3DPrint.com finalize speakers and sponsors. After last year’s all-virtual format, due to…

Ford and Czinger to Give Automotive 3D Printing Keynotes at AMUG 2022

As the 2022 AMUG Conference approaches, the Additive Manufacturing Users Group (AMUG) has announced its keynote speakers. Headlining the event, set to take place in Chicago, Illinois from April 3-7, are Kevin…

The TBGA In-Person Events Survey – “Things That Make You Go Hmmm…”

The AM industry is special. Where else could we get away with writing articles, usually technical ones, peppered with our Spotify playlist titles? So here we go again with a…

3D Printing Trade Show Best Practices: Food and Food for Thought

This is the third installment of ideas, suggestions, and best practices for your 3D printing stand from an interested observer. We previously discussed booth location and how best to connect…

3D Printing Trade Show Best Practices: Stand Design and Location

As an interested party but by no means an expert on organizing stands at 3D printing trade shows, I’ve made a round-up, sharing ideas and best practices for your next…

3D Printing Trade Show Best Practices: How Best to Connect

In a recent series of Formnext articles, I wrote that there were a number of practical tips and observations concerning trade show stands which people were very positive about. Because…

Featured

Formnext 2021: First Day Impressions of Post-Lockdown 3D Printing

Formnext is back and we’ve headed once more to Frankfurt, the lovely city where you can see people smoking crack on the street at 19:00 while the financiers zoom by…

Formnext 2021: Kumovis, Lithoz, Evonik & Blue Power Gear Up for Frankfurt Event

Over 500 3D printing companies will return to Frankfurt, Germany, for one of the most awaited additive manufacturing events of the year: Formnext 2021. Following almost two years of digital…

Featured PRO

Who Will Be the First Billion Dollar Additive Manufacturing Company?

Earlier in the year, SmarTech Analysis co-hosted an online-only event with Stifel where some of the most notable leaders in additive manufacturing got together for an investment strategies panel in…

3D Printing News Briefs, August 28, 2021: Events, Research, & More

We’re starting off with event and business news in today’s 3D Printing News Briefs, as formnext has a couple of event announcements and Anisoprint launched a new production facility in…

Live 3D Printing Events Re-Emerge from Quarantine: RAPID + TCT, AMUG, Inside 3D Printing

After a year of quarantine from the COVID-19 pandemic, live 3D printing events are beginning to announce their trade shows for 2021, perhaps acting as a bellwether for the industry…

In-Person AMUG Conference to Take Place in Orlando, May 2021

While the COVID-19 pandemic saw just about every trade show cancelled or made virtual in 2020 (barely missing the in-person Additive Manufacturing Strategies event by 3DPrint.com), 2021 may be a…