3d printing powders

Featured

Indian Steel Giant ArcelorMittal Now Making Metal 3D Printing Powders

ArcelorMittal (NYSE: MT), a roughly USD$80 billion steel and mining company, recently announced its formal foray into the additive manufacturing (AM) market as a steel powder supplier. Though this is…

Dyndrite Advances 3D Printing Materials at Formnext 2023

Dyndrite has teamed up with Constellium, Elementum 3D, and Sandvik to launch the industry-led Materials Consortium for additive manufacturing (AM). This collaborative initiative is meant to democratize the landscape of…

3D Printing News Briefs, August 26, 2023: Materials, Electroplating, Consumer Goods, & More

It’s all materials, all the time in today’s 3D Printing News Briefs, starting with AddUp adding an aluminum alloy by Constellium to its materials portfolio. igus introduced an online service…

Featured

America Makes Announces $12M Project Calls on Alloy Development & Allowables Generation

This week near Youngstown, Ohio, America Makes is holding its annual Members Meeting & Exchange (MMX), a member-centric event that engenders strategic discussion and collaboration. The public-private partnership for AM,…

3D Printing Webinar and Event Roundup: October 16, 2022

Because there an insane number of events and webinars for this week’s roundup, I’m going to do things a little differently in this edition. First, I’ll list all of the…

Catching Up with Braskem at RAPID + TCT: Expanding Available Additive Materials

During the COVID-19 outbreak, there was one important multinational that jumped into the additive manufacturing (AM) industry without the typical fanfare. This was Braskem (NYSE: BAK), the largest petrochemical company…

Featured

6K Raises $102M in Series D Round Led by Koch Strategic Platforms

6K has just announced that it has closed the first tranche of its Series D round of financing, for $102 million. In all, the company expects to raise a total…

3D Printing Webinar and Event Roundup: February 13, 2022

From aviation and metal 3D printing to PA11 powders, SOLIDWORKS data management, 3D bioprinting, and more, there are plenty of interesting events and webinars in this week’s roundup. Read on…

Sponsored

AMS Speaker Spotlight: Advancing the Adoption of Additive Manufacturing with Pioneering Technology

Uniformity Labs CEO Adam Hopkins will be participating in Additive Manufacturing Strategies 2022, Talk 2: Addressing the Binder Jetting Challenge with Pioneering Technology. Fremont California-based Uniformity Labs develops breakthrough feedstock…

Featured

ASTM’s ICAM 2021: Biggest Challenge for Feedstock to Enable 3D Printing to Scale

Hosted by ASTM International’s Additive Manufacturing Center of Excellence (AMCOE), the 2021 International Conference on Additive Manufacturing (ICAM) was held in Anaheim, California last week. 3DPrint.com was a media sponsor…

Sponsored

Carnegie Mellon University Reinventing Eco-Friendly Architecture with 3D Printed Reclaimed Concrete

Pittsburgh continues to reinvent what it means to be the Steel City, turning to advanced new manufacturing tools and ideas to move toward a cleaner, more sustainable future. Carnegie Mellon…

3D Printing News Briefs, May 26, 2021: ASTM, Teton Simulation, QuesTek, KBM Advanced Materials, GE Aviation & GE Additive

We’re covering some business in today’s 3D Printing News Briefs, as Teton Simulation appointed a new CEO, and ASTM International awarded its William T. Cavanaugh Memorial Award. QuesTek has received…

Joe Kennedy Joins 6K: First Politician to Sit on a 3D Printing Company’s Board

Former Massachusetts congressman Joe Kennedy III joins 6K’s board of directors after 15 years in politics. The leading metal powder producer suggested that the newly appointed politician would add a…

Sponsored

Why it is important to have a broad SLS powder range?

Expectations of 3D printers are growing. Especially in the field of prototyping. To do it right, you need not only a reliable 3D printer but a wide range of materials…

6K Welcomes Expert Metal 3D Printing Team Members and Magnus René as Advisor

U.S. company 6K, which has locations in West Virginia and Massachusetts, uses proprietary advanced plasma processing to develop AM powders from sustainable sources. The company is so named for its…

Metal 3D Printed Aircraft Engine Parts Get Depowdering Boost from Solukon

When you’re printing with powder, removal of that material at the end of the print process is a critical cost-saving phase. But that’s not the only reason it’s important to…

3D Printing News Briefs, October 3, 2020: ALM & BASF, TÜV SÜD, Syqe Medical & Stratasys, WASP

In this week’s 3D Printing News Briefs, we’re talking about materials, medical device 3D printing, investments, and 3D printed eco-housing. Advance Laser Materials has released four new printing powders that…

Sinterit Achieves 26% Powder Refresh Ratio for SLS 3D Printing Material

Desktop selective laser sintering (SLS) 3D printing firm Sinterit, manufacturer of the Lisa series, knows that there are plenty of people out there who think that SLS is a costly…

3D Printing Webinar & Virtual Event Roundup, May 31, 2020

With so many events going virtual due to the ongoing COVID-19 pandemic, there’s also been an increase in the number of webinars that companies in the additive manufacturing industry are…

3D Printing News Briefs: November 15, 2019

In today’s 3D Printing News Briefs, we’re sharing stories about new partnerships, a new material, and a new system for safe powder handling. EOS and AMFG have announced a partnership,…

Solvay: Updated Sinterline Technyl PA6 Powders and HUB Platform at formnext

As we get ever closer to this year’s formnext event, taking place in Frankfurt from November 19-22, more and more 3D printing industry companies are making announcements ahead of the…

3D Printing News Briefs: May 19, 2019

We’ve got business news and materials news for your weekend, just ahead of next week’s massive RAPID + TCT show. 3D Hubs and AM Ventures are both opening new offices,…

Researchers Prepare Silicon Carbide-Polymer Composite Materials for SLS 3D Printing

Silicon carbide, or SiC, has a lot of potential for use in industrial applications, like aeronautic and aerospace engineering, the automotive industry, and the machinery industry, due to its excellent physical…

Specialized Vacuum Cleaners Offer Safe Powder Removal for 3D Printers

Powder-based 3D printing systems are great in many ways, but there’s one issue that comes with all of them – what happens to all that excess powder once a build…