cold spray technology

3D Printing Webinar & Event Roundup: June 18, 2023

It’s a busy week of webinars and events in the 3D printing industry! The Paris Air Show is back, and Stratasys continues its U.S. tour, and starts Stratafest as well….

Commercial & Defense 3D Printing at the Point of Need with SPEE3D

Australian OEM SPEE3D, which specializes in cold spray metal additive manufacturing (AM) solutions that work under extreme conditions, is one of the more interesting companies in the AM industry right…

3D Printing News Briefs, December 10, 2022: Top Workplaces & Nitinol & More

We’re starting with business in today’s 3D Printing News Briefs—Elementum 3D hired a new COO, and the Boston Globe named Seurat Technologies a Top Five Place to Work. Moving on,…

3D Printing News Briefs, November 9, 2022: Deep-Learning, X-Ray CT Inspection & More

Kicking off our 3D Printing News Briefs today is the awarding of a Horizon Europe grant to Titomic Europe, and then on to news from ORNL, which developed a deep-learning…

3D Printing News Briefs, September 8, 2022: Boosting Startups, Expansion in the Middle East, and More

In today’s 3D Printing News Briefs, we have lots of business, as Titomic enters the Middle Eastern markets in a new reseller partnership. Metafold has secured $500,000 CAD in pre-seed…

Aussie Cold Spray 3D Printer Maker Enters Mining Market

Titomic, the Australian original equipment manufacturer (OEM) specializing in cold spray additive manufacturing (AM), announced a second order this month from mining services company Brauntell, also based in Australia. Additionally,…

US Navy Selects Cold Spray Metal 3D Printing for 2022 REPTEX

VRC Metal Systems, an original equipment manufacturer (OEM) based in South Dakota, announced that the company has been selected to participate in the 2022 REPTEX hosted by the U.S. Navy….

3D Printing Webinar and Event Roundup: June 19, 2022

It’s another busy week of events and webinars coming up, starting with the AM Industry Summit in Long Beach. 3D Delta Week and the Silicone Expo are also taking place,…

EWI’s Cold Spray Facility to Use SPEE3D’s Metal 3D Printing

Since launching its patented cold spray-based supersonic 3D deposition (SP3D) additive manufacturing (AM) technology, Australian manufacturer SPEE3D has revolutionized metal 3D printing. In the last few years, the company has…

US Army’s Rock Island Arsenal to Receive 2nd SPEE3D 3D Printer

Military forces worldwide are hyped about using additive manufacturing (AM), spurred by the technology’s ability to produce components on demand, at the point of need, without the logistics of traditional…

3D Printing News Briefs, December 22, 2021: Business, Software, Rhinoplasty, & More

We’re starting off with two acquisitions in today’s 3D Printing News Briefs, and then on to a new Amazon e-commerce store for polypropylene filaments. Then we’ll discuss software, print orientation,…

Australian Military 3D Prints Over a Dozen Armoured Vehicle Parts in the Field

The use of 3D printing in the Australian military is becoming widespread. It all started a few years ago when Prime Minister Scott Morrison’s government announced a AU$200 billion ($148…

SPEE3D’s Supersonic Cold Spray Metal 3D Printing Adopted by Elementum 3D

Australian company SPEE3D develops, assembles, and distributes machines and other integrated system solutions based on its own patented metal cold spray-based Supersonic 3D Deposition additive manufacturing technology (SP3D). Now, additive…

3D Printing Webinar and Event Roundup: August 1st, 2021

There are still plenty of webinars this week, on topics like robotics and personalized medical devices, but there are also a few events to tell you about as well, including…

SPEE3D’s 3D Printed Rocket Engine Project Gets AU$1.5M in Government Funding

Australian metal 3D printing company SPEE3D will receive more than AU$1.5 million ($1.1 million) in government funding to realize one of its most ambitious projects. Through its SPAC3D proposal, SPEE3D…

3D Printing Webinar and Event Roundup: June 19, 2021

We’ve got another busy week of webinars and events this week, covering topics like cosmetics and beauty, simulation for SLS printing, 3D printed consumer products, and more. Read on for…

3D Printing Webinar and Event Roundup: May 16, 2021

Even as we get closer to the official start of summer, that doesn’t mean the amount of webinars, virtual events, and live events are going down; in fact, the opposite…

3D Printing Webinar and Virtual Event Roundup: April 4, 2021

ASTM’s certificate course continues this week, and Cellink is discussing oncology drug screening applications in a webinar. Those are just two of the topics in this week’s webinar roundup, followed…

Australian Army Deploys WarpSPEE3D Metal 3D Printer in Second Field Test

In February of 2020, the Australian Army announced a $1.5 million investment in Darwin- and Melbourne-based additive manufacturing company SPEE3D. The company worked with previous partners Charles Darwin University (CDU)…

Featured

WarpSPEE3D Metal 3D Printer Successfully Deployed by Australian Army in Field Exercise

In November of 2019, Melbourne startup SPEE3D announced that the Royal Australian Navy had decided to deploy its patented supersonic 3D deposition technology for super-sized metal 3D printing in a…

3D Printing News Briefs: February 4, 2020

In today’s 3D Printing News Briefs, we’re covering a range of topics. First, Digital Alloys is sharing a guide on the cold spray metal 3D printing process. UPM just launched…

4DHybrid Project: Modern AM to Support the Maintenance Repair Operations Value Chain

As 3D printing technology progresses at an accelerated speed, research and development efforts around the world continue to ascend into the realm of 4D. Now, the 4DHybrid Project, coordinated by…

NRC Canada Partnering with Polycontrols to Scale Up Cold Spray Additive Manufacturing

Last year, we learned that Jean-Michel Lamarre and Fabrice Bernier of the National Research Council (NRC) of Canada had started fabricating electric motor magnets using a process called cold spray additive manufacturing, or CSAM….

Titomic Provides A Closer Look at New Metal 3D Printer, and Its Unique Kinetic Fusion 3D Printing Process

Less than a year ago, Australian industrial 3D printing company Titomic introduced its innovative Kinetic Fusion process for the first time. Since then, the company has been busy commercializing the…